CFW320-CRS232
WEG Electric CFW320 series communication module, Modbus RTU, 1 port, (1) RS-232 (5-pin terminal) port(s). For use with WEG CFW320 series AC drives.
$66.25
GS20A-MP-AB
DURApulse GS20 series mounting plate, for use with GS10, GS20 and GS30 series A and B frame AC drives. Allows drive input power to be wired from the top.
$66.25
GS4-FAN-BM2
DURApulse GS4 series main cooling fan, replacement, 80 x 80 x 38mm, 24 VDC. For use with GS4-2010, GS4-2015, GS4-4015 and GS4-4020 B frame drives. Electrical connector included.
$66.25
ACG-N1A
IronHorse ACG series conduit box, NEMA 1. For use with ACG series A frame AC drives. Mounting hardware included.
$66.25
GS-BR-400W150
AutomationDirect braking resistor, 400W, 150 ohm, encapsulated. For use with multiple AC drives.
$66.25
CFW300-KFB-S2
WEG Electric EMI input filter, 1-phase, 10A, 35mm DIN rail mount, EMI/RFI filtering. For use with WEG CFW300Bxxx 1-phase AC drives.
$66.25
ACG-N1B
IronHorse ACG series conduit box, NEMA 1. For use with ACG series B frame AC drives. Mounting hardware included.
$67.50
CFW100-IOP
WEG Electric CFW100 series speed potentiometer module, enclosed, IP20, plastic housing. For use with WEG CFW100 series AC drives.
$67.50
TOR254
Roxburgh toroid, EMI/RFI filtering, 66mm inside diameter, 102mm outside diameter, 15mm thick. For use with all AC drives.
$67.50
CFW100-KFABC-S2
WEG Electric EMI input filter, 1-phase, 9.2A, 35mm DIN rail mount, EMI/RFI filtering. For use with WEG CFW100Xxxxxxx2 1-phase AC drives.
$67.50
CFW300-IODR
WEG Electric CFW300 series discrete combo module, Input: 4-point, 24 VDC, sinking/sourcing, Output: 3-point, 250 VAC, relay, (3) Form A (SPST) relays, 5A/point. For use with WEG CFW300 series AC drives.
$68.75
GS20XA-EPB
DURApulse GS20X series EMC shield plate, for use with GS20X series B frame AC drives. Allows motor lead shields to be grounded at the drive.
$68.75
CFW320-IOP
WEG Electric CFW320 series speed potentiometer module, enclosed, IP20, plastic housing. For use with WEG CFW320 series AC drives.
$70
GS20XA-EPC
DURApulse GS20X series EMC shield plate, for use with GS20X series C frame AC drives. Allows motor lead shields to be grounded at the drive.
$70
GS30A-FAN-G
DURApulse GS30 series main cooling fan, replacement, 204 x 87 x 50mm, 24 VDC. For use with GS30 series G frame AC drives. Electrical connector included.
$70
GS-BR-400W040
AutomationDirect braking resistor, 400W, 40 ohm, encapsulated. For use with multiple AC drives.
$70
GS30A-06CDD
DURApulse GS30 series discrete combo module, Input: 3-point, 24 VDC, sinking/sourcing selectable, Output: 3-point, 48 VDC, sinking/sourcing selectable, 30 mA/point, 50 mA resistive output current. For use with GS30 series AC drives.
$71.25
GS30A-ESP-I
DURApulse GS30 series EMC shield plate, for use with GS30 series I frame AC drives. Allows motor lead shields to be grounded at the drive.
$71.25
GS30A-N1G
DURApulse GS30 series conduit box, NEMA 1. For use with GS30 series G frame AC drives. Mounting hardware included.
$72.50
CFW320-KFA-S1-S2
WEG Electric EMI input filter, 1-phase, 7.3A, 35mm DIN rail mount, EMI/RFI filtering. For use with WEG CFW320AxxxSx 1-phase AC drives.
$72.50
CFW100-IOA
WEG Electric CFW100 series analog combo module, Analog Input: 1-channel, current/voltage, Analog Output: 1-channel, current/voltage. For use with WEG CFW100 series AC drives.
$73.75
ACG-N1C
IronHorse ACG series conduit box, NEMA 1. For use with ACG series C frame AC drives. Mounting hardware included.
$73.75
GS20XA-FAN-B
DURApulse GS20X series main cooling fan, replacement, 60 x 60 x 25mm, 12 VDC. For use with GS20X series B frame AC drives. Electrical connector included.
$75
LR2-40P2
AutomationDirect LR2 series line reactor, 460 VAC, 1/4hp, 3-phase, 0.7A, 3% impedance, input or output side. For use with multiple AC drives.
$75
EMF11AM21A
AutomationDirect EMI input filter, 240 VAC, 1-phase, 11A, panel mount, EMI/RFI filtering, drive rated, standard performance, screw terminals and ring terminals. For use with 1-phase GS10, GS20, GS20X and GS30 series AC drives.
$75
Showing pages
1
of
37