GR-REC4-GFCI
Gladiator quad straight blade receptacle, 15A, 125 VAC, 1-phase, 2-pole, 3-wire, ground-fault circuit interruption protection, glass fiber reinforced polyamide housing, panel or 35mm DIN rail mount.
$102.50
DN-T12B-A
DINnector screw single-level feedthrough terminal block, accepts wire size 24-12 AWG, blue, 20A, 35mm DIN rail mount, 100kA SCCR. Package of 100. For use with jumpers DN-24J2Y, DN-2J2Y and DN-3J2Y.
$103.75
DN-T12BLK-A
DINnector screw single-level feedthrough terminal block, accepts wire size 24-12 AWG, black, 20A, 35mm DIN rail mount, 100kA SCCR. Package of 100. For use with jumpers DN-24J2Y, DN-2J2Y and DN-3J2Y.
$103.75
DN-T12BR-A
DINnector screw single-level feedthrough terminal block, accepts wire size 24-12 AWG, brown, 20A, 35mm DIN rail mount, 100kA SCCR. Package of 100. For use with jumpers DN-24J2Y, DN-2J2Y and DN-3J2Y.
$103.75
DN-T12GRN-A
DINnector screw single-level feedthrough terminal block, accepts wire size 24-12 AWG, green, 20A, 35mm DIN rail mount, 100kA SCCR. Package of 100. For use with jumpers DN-24J2Y, DN-2J2Y and DN-3J2Y.
$103.75
DN-T12ORG-A
DINnector screw single-level feedthrough terminal block, accepts wire size 24-12 AWG, orange, 20A, 35mm DIN rail mount, 100kA SCCR. Package of 100. For use with jumpers DN-24J2Y, DN-2J2Y and DN-3J2Y.
$103.75
DN-T12RED-A
DINnector screw single-level feedthrough terminal block, accepts wire size 24-12 AWG, red, 20A, 35mm DIN rail mount, 100kA SCCR. Package of 100. For use with jumpers DN-24J2Y, DN-2J2Y and DN-3J2Y.
$103.75
DN-T12W-A
DINnector screw single-level feedthrough terminal block, accepts wire size 24-12 AWG, white, 20A, 35mm DIN rail mount, 100kA SCCR. Package of 100. For use with jumpers DN-24J2Y, DN-2J2Y and DN-3J2Y.
$103.75
DN-T12YEL-A
DINnector screw single-level feedthrough terminal block, accepts wire size 24-12 AWG, yellow, 20A, 35mm DIN rail mount, 100kA SCCR. Package of 100. For use with jumpers DN-24J2Y, DN-2J2Y and DN-3J2Y.
$103.75
ZL-D24-CBL40-1X
ZIPLink PLC I/O cable, 40-pin connector to 40-pin connector, 45-degree connector angle, 3.2ft/1m cable length. For use with BRX modules and DirectLOGIC DL205 and DL405 modules.
$105
DN-QKBD12-A
DINnector screwless disconnect terminal block, accepts wire size 24-12 AWG, gray, 20A, 35mm DIN rail mount, 10kA SCCR. Package of 25. For use with jumpers DN-24J2Y, DN-2J2Y or DN-3J2Y.
$105
ZP-PNA-06-100
ZIPport panel interface connector, (1) 9-pin D-sub connector with female exterior/male interior.
$105
LW-PX300VP
Epson LabelWorks PX series portable label printer kit, prints labels up to 18mm (3/4in) wide or 5mm (3/16in) nominal diameter, thermal transfer, 180dpi, back-lit monochrome LCD, manual label cutter. For use with Epson LabelWorks PX series label cartridges.
$106.25
KN-M10GRY
Konnect-It screw mini single-level feedthrough terminal block, accepts wire size 26-10 AWG, gray, 30A, 15mm DIN rail mount, 100kA SCCR. Package of 100. For use with jumpers KN-2JM10, KN-3JM10, KN-4JM10 and KN-10JM10.
$107.50
KN-M10BLU
Konnect-It screw mini single-level feedthrough terminal block, accepts wire size 26-10 AWG, blue, 30A, 15mm DIN rail mount, 100kA SCCR. Package of 100. For use with jumpers KN-2JM10, KN-3JM10, KN-4JM10 and KN-10JM10.
$107.50
KN-G2-10
Konnect-It screw grounding terminal block, accepts wire size 12-2 AWG, green and yellow, 35mm DIN rail mount, 100kA SCCR. Package of 10. Use to mechanically and electrically connect wires to 35mm DIN rail through the screw-down clamping foot.
$107.50
$107.50
DN-T10-A
DINnector screw single-level feedthrough terminal block, accepts wire size 24-10 AWG, gray, 30A, 35mm DIN rail mount, 100kA SCCR. Package of 100. For use with jumpers DN-24J4Y, DN-2J4Y and DN-3J4Y.
$108.75
DN-3J4Y
DINnector terminal block jumper, push-in type, 3-pole, yellow, 25A, 600V rated (UL). Package of 100. For use with DN-T10-A, DN-D10-A, DN-M10-A and DN-Q10-A series terminal block.
$108.75
ZP-PNA-10-200
ZIPport panel interface connector, (2) 9-pin D-sub connectors with female exterior/male interior.
$110
BRY320C6W
Bryant watertight pin and sleeve connector, 20A, 250 VAC, 1-phase, 2-pole, 3-wire, 6 hour, accepts cord size 0.37-0.595in, IP67, nylon housing, blue.
$110
BRY420R9W
Bryant watertight single pin and sleeve receptacle, 20A, 250 VAC, 3-phase, 3-pole, 4-wire, 9 hour, IP67, nylon housing, blue.
$110
BRY420R7W
Bryant watertight single pin and sleeve receptacle, 20A, 480 VAC, 3-phase, 3-pole, 4-wire, 7 hour, IP67, nylon housing, red.
$110
KN-D12LED-24DC
Konnect-It screw double-level feedthrough terminal block, connected between levels and power indicator, accepts wire size 26-12 AWG, gray, 20A, 24 VDC LED indicator(s), 35mm DIN rail mount, 100kA SCCR. Package of 20.
$111.25
KN-D12LED-24AC
Konnect-It screw double-level feedthrough terminal block, connected between levels and power indicator, accepts wire size 26-12 AWG, gray, 20A, 24 VAC LED indicator(s), 35mm DIN rail mount, 100kA SCCR. Package of 20.
$111.25
Showing pages
1
of
98