ZP-MC06B-2-SSM16CA
ZIPport surface mount housing, single lever, automatic closing cover, connector housing size 6B, (2) Pg 16 threaded holes, heavy-duty die cast aluminum. For use with ZIPport size 6B 2-peg connector housings.
$203.75
4000-68000-4030000
Murrelektronik Modlink panel interface insert, single 120 VAC outlet, (1) RJ45 Cat5e female exterior/female interior, (1) USB A port with female exterior/ female interior, single frame. For use with Modlink series frames.
$205
KN-D12GRN
Konnect-It screw double-level feedthrough terminal block, accepts wire size 26-12 AWG, green, 20A, 35mm DIN rail mount, 100kA SCCR. Package of 100. For use with jumpers KN-2J12, KN-3J12, KN-4J12 and KN-10J12.
$206.25
KN-D12ORG
Konnect-It screw double-level feedthrough terminal block, accepts wire size 26-12 AWG, orange, 20A, 35mm DIN rail mount, 100kA SCCR. Package of 100. For use with jumpers KN-2J12, KN-3J12, KN-4J12 and KN-10J12.
$206.25
KN-D12RED
Konnect-It screw double-level feedthrough terminal block, accepts wire size 26-12 AWG, red, 20A, 35mm DIN rail mount, 100kA SCCR. Package of 100. For use with jumpers KN-2J12, KN-3J12, KN-4J12 and KN-10J12.
$206.25
KN-D12YEL
Konnect-It screw double-level feedthrough terminal block, accepts wire size 26-12 AWG, yellow, 20A, 35mm DIN rail mount, 100kA SCCR. Package of 100. For use with jumpers KN-2J12, KN-3J12, KN-4J12 and KN-10J12.
$206.25
KN-G10
Konnect-It screw grounding terminal block, accepts wire size 26-10 AWG, green and yellow, 35mm DIN rail mount, 100kA SCCR. Package of 50. Use to mechanically and electrically connect wires to 35mm DIN rail through the screw-down clamping foot.
$206.25
LW-PX400
Epson LabelWorks PX series portable label printer, prints labels up to 24mm (1in) wide or 14mm (9/16in) nominal diameter, thermal transfer, 180dpi, Android/iOS, automatic label cutter. For use with Epson LabelWorks PX series label cartridges.
$206.25
KN-PD25DA2
Konnect-It screwless feedthrough terminal block, double-level, 2 diodes connected between levels, lower level no connection, cathodes on lower level, accepts wire size 28-12 AWG, gray, 1A, 300 VAC/VDC, 35mm DIN rail mount. Package of 25.
$207.50
KN-PD25DB2
Konnect-It screwless feedthrough terminal block, double-level, 1 diode connected between levels, 1 diode on lower level, cathodes on output, accepts wire size 28-12 AWG, gray, 1A, 300 VAC/VDC, 35mm DIN rail mount. Package of 25.
$207.50
KN-PD25DC2
Konnect-It screwless feedthrough terminal block, double-level, 2 diodes connected between levels, lower level no connection, cathodes on top level, accepts wire size 28-12 AWG, gray, 1A, 300 VAC/VDC, 35mm DIN rail mount. Package of 25.
$207.50
ZP-MC06B-2-SSM21CA
ZIPport surface mount housing, single lever, automatic closing cover, connector housing size 6B, (2) Pg 21 threaded holes, heavy-duty die cast aluminum. For use with ZIPport size 6B 2-peg connector housings.
$207.50
ZP-MC24B-2-SBHCA
ZIPport bulkhead housing, single lever, automatic closing cover, connector housing size 24B, heavy-duty die cast aluminum. For use with ZIPport size 24B 2-peg connector housings.
$207.50
KN-P25E-1-2
Konnect-It screwless common point feedthrough terminal block, single-level, 1 input to 2 outputs bridged, accepts wire size 28-12 AWG, gray, 20A, 300 VAC/VDC, 35mm DIN rail mount. Package of 50.
$208.75
KN-MG12
Konnect-It screw mini grounding terminal block, accepts wire size 26-12 AWG, green and yellow, 15mm DIN rail mount, 100kA SCCR. Package of 50. Use to mechanically and electrically connect wires to 15mm DIN rail through the snap-on clamping foot.
$211.25
KN-P25CDIS-2-2
Konnect-It screwless disconnect terminal block, single-level, 2 inputs to 2 outputs with disconnect, accepts wire size 28-12 AWG, gray, 20A, 300 VAC/VDC, 35mm DIN rail mount. Package of 50.
$211.25
KN-PD25-1-PNLD24
Konnect-It screwless feedthrough terminal block, double-level, pin connection input with power indicator, accepts wire size 28-12 AWG, gray, 10A, 24 VAC/VDC, LED indicator(s), 35mm DIN rail mount. Package of 25.
$211.25
KN-PT25-1-1-GND-25
Konnect-It screwless feedthrough terminal block, triple-level with ground and marked for phase neutral and ground, accepts wire size 28-12 AWG, gray, 20A, 300 VAC/VDC, 35mm DIN rail mount. Package of 25.
$213.75
KN-P25LD24-1-PN
Konnect-It screwless feedthrough terminal block, single-level, pin connection input power indicator, accepts wire size 28-12 AWG, gray, 10A, 24 VAC/VDC, LED indicator(s), 35mm DIN rail mount. Package of 50.
$215
ZP-MC06B-2-SSM29CA
ZIPport surface mount housing, single lever, automatic closing cover, connector housing size 6B, (2) Pg 29 threaded holes, heavy-duty die cast aluminum. For use with ZIPport size 6B 2-peg connector housings.
$216.25
ZP-MC-CC-M16A-22G
ZIPport crimp contact, male, 16 amp, accepts wire size 26-22 AWG, gold-plated copper alloy. Package of 100. For use with ZIPport multi-wire male inserts rated for 16 amps.
$218.75
ZP-MC-CC-M16A-20G
ZIPport crimp contact, male, 16 amp, accepts wire size 20 AWG, gold-plated copper alloy. Package of 100. For use with ZIPport multi-wire male inserts rated for 16 amps.
$218.75
ZP-MC-CC-M16A-18G
ZIPport crimp contact, male, 16 amp, accepts wire size 18 AWG, gold-plated copper alloy. Package of 100. For use with ZIPport multi-wire male inserts rated for 16 amps.
$218.75
ZP-MC-CC-M16A-16G
ZIPport crimp contact, male, 16 amp, accepts wire size 16 AWG, gold-plated copper alloy. Package of 100. For use with ZIPport multi-wire male inserts rated for 16 amps.
$218.75
ZP-MC-CC-M16A-12G
ZIPport crimp contact, male, 16 amp, accepts wire size 12 AWG, gold-plated copper alloy. Package of 100. For use with ZIPport multi-wire male inserts rated for 16 amps.
$218.75
Showing pages
1
of
98