XEM-DN16H2

XEM-DN16H2

LS Electric XGB PLC, 24 VDC required, Ethernet, serial and USB B ports, Discrete Input: 8-point, DC, Discrete Output: 8-point, sinking, 4 high-speed input point(s), 2 high-speed output point(s).

$425
/
Technical Data
BrandLS Electric XGB
ItemPLC
Total Memory544 KB
Program Memory384 KB
User Data Memory160 KB
Programming LanguageIEC 61131-3 ladder, structured text, sequential function chart and instruction list
Programming SoftwareXG5000 programming software v4.77 or later
Communication Port and Connection Type(s)
  • (1) Ethernet 10/100Base-T (RJ45)
  • (1) RS-232/RS-485 (5-pin terminal)
  • (1) miniB-USB
Port Protocol(s)
  • Modbus RTU Master/Slave
  • Modbus ASCII Master/Slave
  • Modbus TCP Client/Server
  • LS XGT protocol Client/Server
  • programming and monitoring
Port Speed(s)
  • 10/100 Mbps
  • up to 115.2k baud
Real Time Clock/CalendarYes
Retentive MemoryYes
Battery BackupNo
Maximum Expansion Modules Allowed7
External Power Requirement24 VDC
Number of Discrete Input Points8
Nominal Input Voltage24 VDC
Voltage TypeDC
Discrete Input TypeSinking/sourcing
Number of Non-Isolated Discrete Input Commons1
Number of Points per Discrete Input Common8
Frequency Response200 kHz
Number of Discrete Output Points8
Nominal Output Voltage12-24 VDC
Discrete Output TypeSinking
Load Current(2) 0.1A/point, (6) 0.5A/point
Number of Non-Isolated Discrete Output Commons1
Number of Points per Discrete Output Common8
Maximum Switching Frequency200 kHz
Maximum Number of PID Loops16
Number of High-Speed Capable Input Points4
High-Speed Counter(s)
  • up to (4) up counters
  • up to (4) down counters
  • up to (2) up/down counters
  • up to (2) pulse/direction (bi-directional) counters
  • up to (2) quadrature (A and B) counters
Frequency Measurement
  • up to (4) up counters
  • up to (4) down counters
  • up to (2) up/down counters
  • up to (2) pulse/direction (bi-directional) counters
  • up to (2) quadrature (A and B) counters
Interrupt(s)
  • up to (16) cycle time interrupts
  • up to (8) external input interrupts
  • up to (16) internal device interrupts
  • up to (4) high-speed counter interrupts
  • up to (1) positioning interrupt
Number of High-Speed Capable Output Points2
Output Pulse Mode(s)
  • up to (2) PTO pulse/direction outputs
Axis Profile(s)
  • relative/absolute positioning
  • velocity mode
  • trapezoid
  • S-curve
  • electronic gearing
  • camming
  • following
  • homing
  • jogging
  • inching
  • teach functions
  • linear interpolation
  • ellipse interpolation
  • helical interpolation
  • software limit switches
  • online edit
  • x-y trend view
IncludesI/O terminal blocks, 3-wire power cable and 5-pin serial communication terminal block
Dangerous Goods
  • Battery Installed: Yes (not user replaceable)
  • Packaging Instructions: 970
  • UN Number: UN3091
  • Hazard Type: Lithium Batteries
  • Battery Type: Coin
  • Lithium Content: 0.01
Downloads
Technical Specifications Manual Insert Software Firmware Helpfile 2d Drawing 3d Model

Recently viewed