CFW100-IOAR
WEG Electric CFW100 series relay/analog combo module, Analog Input: 1-channel, current/voltage, Discrete Output: 1-point, relay, (1) Form A (SPST) relay. For use with WEG CFW100 series AC drives.
$61.25
GS30A-ESP-G
DURApulse GS30 series EMC shield plate, for use with GS30 series G frame AC drives. Allows motor lead shields to be grounded at the drive.
$61.25
$61.25
GS4-FAN-CM
DURApulse GS4 series main cooling fan, replacement, 92 x 92 x 38mm, 24 VDC. For use with GS4 C frame drives. Electrical connector included.
$62.50
ACG-KPD
IronHorse ACG series remote keypad, for use with IronHorse ACG series AC drives. (1) 16.4ft/5m Ethernet patch cable included.
$62.50
RES90F01
Roxburgh EMI input filter, 120/240 VAC, 1-phase, 1A, panel mount, EMI/RFI filtering, multi-stage, drive rated, very high performance, 1/4in quick-disconnect. For use with 1-phase AC drives.
$62.50
RF022B43AA
AutomationDirect EMI input filter, 460 VAC, 3-phase, 5.9A, panel mount, EMI/RFI filtering, drive rated, standard performance, screw terminals and pigtail. For use with 3-phase AC drives.
$63.75
CFW100-CUSB
WEG Electric CFW100 series communication module, Modbus RTU, 1 port, (1) miniB-USB port(s). For use with WEG CFW100 series AC drives.
$65
GS30A-ESP-H
DURApulse GS30 series EMC shield plate, for use with GS30 series H frame AC drives. Allows motor lead shields to be grounded at the drive.
$65
RES90F03
Roxburgh EMI input filter, 120/240 VAC, 1-phase, 3A, panel mount, EMI/RFI filtering, multi-stage, drive rated, very high performance, 1/4in quick-disconnect. For use with 1-phase AC drives.
$65
CFW320-CRS485
WEG Electric CFW320 series communication module, Modbus RTU, 2 ports, (1) RS-485 (5-pin terminal) and (1) miniB-USB port(s). For use with WEG CFW320 series AC drives.
$66.25
CFW320-CRS232
WEG Electric CFW320 series communication module, Modbus RTU, 1 port, (1) RS-232 (5-pin terminal) port(s). For use with WEG CFW320 series AC drives.
$66.25
GS20A-MP-AB
DURApulse GS20 series mounting plate, for use with GS10, GS20 and GS30 series A and B frame AC drives. Allows drive input power to be wired from the top.
$66.25
GS4-FAN-BM2
DURApulse GS4 series main cooling fan, replacement, 80 x 80 x 38mm, 24 VDC. For use with GS4-2010, GS4-2015, GS4-4015 and GS4-4020 B frame drives. Electrical connector included.
$66.25
ACG-N1A
IronHorse ACG series conduit box, NEMA 1. For use with ACG series A frame AC drives. Mounting hardware included.
$66.25
GS-BR-400W150
AutomationDirect braking resistor, 400W, 150 ohm, encapsulated. For use with multiple AC drives.
$66.25
CFW300-KFB-S2
WEG Electric EMI input filter, 1-phase, 10A, 35mm DIN rail mount, EMI/RFI filtering. For use with WEG CFW300Bxxx 1-phase AC drives.
$66.25
ACG-N1B
IronHorse ACG series conduit box, NEMA 1. For use with ACG series B frame AC drives. Mounting hardware included.
$67.50
CFW100-IOP
WEG Electric CFW100 series speed potentiometer module, enclosed, IP20, plastic housing. For use with WEG CFW100 series AC drives.
$67.50
TOR254
Roxburgh toroid, EMI/RFI filtering, 66mm inside diameter, 102mm outside diameter, 15mm thick. For use with all AC drives.
$67.50
CFW100-KFABC-S2
WEG Electric EMI input filter, 1-phase, 9.2A, 35mm DIN rail mount, EMI/RFI filtering. For use with WEG CFW100Xxxxxxx2 1-phase AC drives.
$67.50
CFW300-IODR
WEG Electric CFW300 series discrete combo module, Input: 4-point, 24 VDC, sinking/sourcing, Output: 3-point, 250 VAC, relay, (3) Form A (SPST) relays, 5A/point. For use with WEG CFW300 series AC drives.
$68.75
GS20XA-EPB
DURApulse GS20X series EMC shield plate, for use with GS20X series B frame AC drives. Allows motor lead shields to be grounded at the drive.
$68.75
CFW320-IOP
WEG Electric CFW320 series speed potentiometer module, enclosed, IP20, plastic housing. For use with WEG CFW320 series AC drives.
$70
GS20XA-EPC
DURApulse GS20X series EMC shield plate, for use with GS20X series C frame AC drives. Allows motor lead shields to be grounded at the drive.
$70
Showing pages
1
of
30