GS20A-FAN-E
DURApulse GS20 series main cooling fan, replacement, 92 x 92 x 28mm, 24 VDC. For use with GS20 and GS30 series E frame AC drives. Electrical connector included.
$55
GS-BR-300W250
AutomationDirect braking resistor, 300W, 250 ohm, encapsulated. For use with multiple AC drives.
$55
GS20A-ESP-F
DURApulse GS20 EMC shield plate, for use with GS20 and GS30 series F frame AC drives. Allows motor lead shields to be grounded at the drive.
$56.25
ACG-FAN-E15
IronHorse ACG series main cooling fan, replacement, 80 x 80 x 25mm, 24 VDC. For use with ACG series 15hp AC drives.
$56.25
12330463
WEG Electric keypad mounting cable, 32.8ft/10m cable length. For use with WEG CFW500 series drive keypads.
$56.25
GS-BR-500W100
AutomationDirect braking resistor, 500W, 100 ohm, encapsulated. For use with multiple AC drives.
$56.25
CFW300-KFA-S1-S2
WEG Electric EMI input filter, 1-phase, 7.3A, 35mm DIN rail mount, EMI/RFI filtering. For use with WEG CFW300Axxx 1-phase AC drives.
$57.50
SSW0708900-IP20-3C
WEG Electric SSW07 series touch shield, for use with WEG SSW07 and SSW900 series 130-200A soft starters. Mounting hardware included. Provides IP20 protection rating.
$57.50
GS20XA-EPA
DURApulse GS20X series EMC shield plate, for use with GS20X series A frame AC drives. Allows motor lead shields to be grounded at the drive.
$58.75
GS-BR-300W070
AutomationDirect braking resistor, 300W, 70 ohm, encapsulated. For use with multiple AC drives.
$58.75
GS20A-FAN-F
DURApulse GS20 series main cooling fan, replacement, 92 x 92 x 38mm, 24 VDC. For use with GS20 and GS30 series F frame AC drives. Electrical connector included.
$60
CFW100-CRS485
WEG Electric CFW100 series communication module, Modbus RTU, 1 port, (1) RS-485 (5-pin terminal) and (1) miniB-USB port(s). For use with WEG CFW100 series AC drives.
$61.25
CFW100-IOD
WEG Electric CFW100 series discrete input module, 4-point, 24 VDC, sinking/sourcing. For use with WEG CFW100 series AC drives.
$61.25
CFW100-IOAR
WEG Electric CFW100 series relay/analog combo module, Analog Input: 1-channel, current/voltage, Discrete Output: 1-point, relay, (1) Form A (SPST) relay. For use with WEG CFW100 series AC drives.
$61.25
GS30A-ESP-G
DURApulse GS30 series EMC shield plate, for use with GS30 series G frame AC drives. Allows motor lead shields to be grounded at the drive.
$61.25
$61.25
SSW0708900-KVT-2B
WEG Electric SSW07 series main cooling fan, 109 x 45 x 38mm, 24 VDC. For use with WEG SSW07 and SSW900 series 45-105A soft starters. Electrical connector included.
$61.25
GS4-FAN-CM
DURApulse GS4 series main cooling fan, replacement, 92 x 92 x 38mm, 24 VDC. For use with GS4 C frame drives. Electrical connector included.
$62.50
ACG-KPD
IronHorse ACG series remote keypad, for use with IronHorse ACG series AC drives. (1) 16.4ft/5m Ethernet patch cable included.
$62.50
RES90F01
Roxburgh EMI input filter, 120/240 VAC, 1-phase, 1A, panel mount, EMI/RFI filtering, multi-stage, drive rated, very high performance, 1/4in quick-disconnect. For use with 1-phase AC drives.
$62.50
RF022B43AA
AutomationDirect EMI input filter, 460 VAC, 3-phase, 5.9A, panel mount, EMI/RFI filtering, drive rated, standard performance, screw terminals and pigtail. For use with 3-phase AC drives.
$63.75
CFW100-CUSB
WEG Electric CFW100 series communication module, Modbus RTU, 1 port, (1) miniB-USB port(s). For use with WEG CFW100 series AC drives.
$65
GS30A-ESP-H
DURApulse GS30 series EMC shield plate, for use with GS30 series H frame AC drives. Allows motor lead shields to be grounded at the drive.
$65
RES90F03
Roxburgh EMI input filter, 120/240 VAC, 1-phase, 3A, panel mount, EMI/RFI filtering, multi-stage, drive rated, very high performance, 1/4in quick-disconnect. For use with 1-phase AC drives.
$65
CFW320-CRS485
WEG Electric CFW320 series communication module, Modbus RTU, 2 ports, (1) RS-485 (5-pin terminal) and (1) miniB-USB port(s). For use with WEG CFW320 series AC drives.
$66.25
Showing pages
1
of
37